Sycago
All toolsReport an issue ↗

Image tools / FREE ONLINE TOOL

Image Cropper

Select a rectangular image area with a pointer or pixel coordinates and export the cropped result.

No signupNo API keysLocal processing

YOUR WORKSPACE

Image Cropper

How to use ↓

Add your files

Drop files here, or choose from your device.

Still JPG, PNG or WebP · 20 MB per image · 100 MB total
One input file · Device memory may impose lower limits.

Ready. Your inputs stay in this tool's browser session.

Cropping keeps a rectangular part of an image and removes the surrounding area from the exported copy. It is useful for improving composition, isolating a product, removing unnecessary margins, or preparing a shape for a later layout. Unlike resizing, a crop changes which parts of the source remain visible. Decide what must stay in the picture before concentrating on the final dimensions.

The Image Cropper lets you choose a region with a pointer and refine it using numeric x, y, width, and height values measured in original-image pixels. That combination makes it possible to move quickly by eye and then check the selection precisely. The tool creates a separate rectangular image copy; it does not automatically find a subject, remove a background, create a circular cut-out, or reconstruct material outside the source.

Treat the crop as a decision about content

An image has a fixed source rectangle. A crop is a smaller rectangle inside it, described by a starting position and its dimensions. In the usual image coordinate system, x increases from left to right and y increases from top to bottom. A starting position of x = 200 and y = 100 means the crop begins 200 source pixels from the left and 100 from the top.

Width and height describe the selected region, not the distance from the top-left corner of the original to its far edge. For a crop at x = 200 with width = 800, the far horizontal boundary is x + width = 1,000. Keeping this distinction clear prevents a common mistake when entering measurements copied from an image specification or another editor.

A crop can improve composition without improving captured detail. Keeping a small face from a wide group photograph may provide a useful framing, but the face still contains only the source pixels available in that area. Enlarging the crop later cannot restore missing texture. The cropper does not use AI to extend the canvas or generate a cleaner subject.

A step-by-step workflow

  1. Inspect the source and its dimensions

    Load the image and note its original width and height. Identify the subject, edge content, and any detail the final image must retain. Look beyond the central subject: captions, shadows, product corners, or nearby context can be important. Keep an unchanged original so you can reconsider the composition later.

  2. Make an initial pointer selection

    Drag a rectangle around the region you want to keep. Use the pointer as a composition aid rather than assuming its displayed distance equals original-image pixels. A large image may be scaled down to fit the preview. The numeric fields provide the original-pixel values needed for an exact selection.

  3. Refine x and y

    Adjust the starting coordinates to move the selection within the source. Smaller x moves the left boundary toward the left edge; smaller y moves the top boundary toward the top edge. Check the preview after changing a value. If the source orientation is not what you expected, correct orientation before deciding precise coordinates.

  4. Refine width and height

    Enter the desired region size and check that the full rectangle stays inside the original. The horizontal constraint is x + width no greater than source width, and the vertical constraint is y + height no greater than source height. Use positive dimensions and inspect the resulting composition rather than relying on the arithmetic alone.

  5. Consider the output shape

    Divide width by height, or simplify their ratio, when a destination needs a particular shape. A square requires equal width and height. A 3:2 crop needs a width one and a half times its height. A correct ratio says nothing about which subject parts should be included, so review the actual image before exporting.

  6. Export and check the saved crop

    Choose the needed output format, process the result, and open the downloaded copy. Examine all four edges, verify dimensions, and confirm the intended subject is complete. If the crop will be resized afterward, evaluate it at that final display size as well. Save a clearly named copy rather than replacing your only source.

Choose settings for the destination

Use pointer selection for a first composition and original-pixel numbers for repeatable precision. The preview can be scaled, so its on-screen dimensions are not a substitute for source-coordinate fields. Decide whether the task is an exact extraction, a new composition, or preparation for another tool.

Settings and checks for common situations
SituationPractical choiceWhat to inspect
Remove empty margins from a scanChoose a rectangle just outside the meaningful content.Keep page numbers, small notes, and faint marks that may sit closer to the edges than the main text.
Make a square thumbnailSet crop width and height to equal values.Inspect the subject’s full extent; a square centred on the frame may still cut off an off-centre object.
Extract a precise source regionEnter x, y, width, and height in original pixels.Check x + width and y + height against the source dimensions and review the resulting edges.
Prepare a photo for another sizeChoose the desired shape before resizing the cropped copy.A small crop enlarged later can become soft even when its final pixel dimensions seem large.
Remove incidental edge contentCrop the content completely outside the kept rectangle.Check the downloaded crop; cropping is not a certified document-redaction or metadata-removal process.

Avoid making the crop excessively tight just because the destination has a fixed shape. A little space around a subject can help it survive a later display crop or a rounded card mask. If exact subject framing is required, use the recipient’s instructions and inspect the final layout rather than assuming the cropper judges those rules.

Worked examples

A numeric crop from a large photograph

Consider a 4,000 × 3,000 source. You want a landscape region beginning at x = 500 and y = 300, with width = 3,000 and height = 2,000. Its far boundaries are 3,500 and 2,300, both within the original. The exported region has a 3:2 shape before any separate resizing. It excludes 500 pixels at the left and 700 below the selected area.

Check the composition after entering the values. Mathematically valid coordinates can still remove a hand, label, or important piece of context. If the intended region was described using far-edge coordinates instead of dimensions, convert carefully: an ending x of 3,500 minus a starting x of 500 gives a width of 3,000, not 3,500.

A square product crop

A 2,400 × 1,600 photograph shows a product slightly right of centre. A 1,400 × 1,400 crop can produce a square while retaining some surrounding space, but centring it on the image may leave the product unbalanced. Use the pointer to find a pleasing position, then refine x and y while keeping the two dimensions equal.

Inspect the shadow and any packaging corners, not just the central body of the item. If the full product will not fit inside a suitable square region, padding in the resizer can be a better choice than cutting it off. Cropping solves a composition problem by discarding edges; it cannot create extra background around an already tight source.

Removing borders from a scanned page

A scan includes a black scanner-bed border and a complete page of notes. Select a rectangle that excludes the border while leaving a safe margin around the page content. At a small preview, faint handwriting near an edge can resemble empty paper, so zoom or inspect the source closely before making the final selection.

The crop can make the scan easier to place in a document, but it does not straighten a slightly tilted page, recognise text, or clean stains. Quarter-turn rotation is a separate operation, and arbitrary-angle deskew is not supplied by the cropper. Preserve the source if the notes are important or if someone may later need the surrounding context.

Keep coordinates tied to the correct source

A precise rectangle is meaningful only in a particular pixel grid. If someone sends crop values for a large original and you apply them to a smaller preview download, the same numbers will select a different area or exceed the image boundaries. A rotation changes the grid’s orientation too. Confirm the source filename, dimensions, and orientation before applying coordinates supplied by another person.

When handing off an exact crop, state the starting x and y plus the width and height, and distinguish those values from two corner positions. Include a visual reference when possible so a reviewer can spot a transcription error. If a replacement source has different dimensions, reassess its composition rather than scaling every coordinate blindly. A new photograph can have the same aspect ratio while placing the subject in a different location. Numerical repeatability is helpful for identical sources, but visual inspection remains necessary for different content.

Review all four boundaries and the downstream use

Look around the entire crop boundary before judging the middle. A good central subject can distract from a clipped caption, missing finger, or thin strip of unwanted border at one side. Check corners and shadows, and consider whether the removed context changes how the picture will be understood. Composition is not only a matter of filling the rectangle.

Verify coordinates when precision matters. A scaled preview may make two nearby selections appear almost identical, while their source values differ by many pixels. Compare the region’s start and dimensions with your plan, then open the exported image to confirm its actual size. If you are working from written coordinates, establish whether they describe the original file and the same orientation you loaded.

Finally, test the crop in its destination. Another application may apply its own centre crop, aspect-ratio mask, or size reduction. Keep a little safe space where appropriate and inspect the smallest readable details after final scaling. If you are excluding sensitive content, examine the downloaded copy carefully and use a suitable redaction workflow where the task requires formal assurance. Cropping a raster copy is not a claim about every piece of information in a larger source workflow.

Files, limits, and browser support

The image tools work within explicit input and output limits. Each input file may be up to 20 MB, with no more than 20 files and 100 MB combined in one selection. A decoded image may contain no more than 24 million pixels, and neither input side may exceed 12,000 pixels. These checks concern different properties: a highly compressed photograph can have a modest file size while expanding into a very large pixel grid. A file below the megabyte limit can therefore still exceed the decoded-image limit.

An exported image is limited to 8,000 pixels on either side and 24 million pixels in total. Multiplying width by height gives the pixel count. For example, 6,000 × 4,000 is exactly 24 million pixels, while 8,000 × 4,000 is 32 million and exceeds the area limit even though each side fits the side limit. Choose dimensions that satisfy both limits. These are processing guardrails, not a statement that every allowed file will be equally fast on every device.

Browser decoding and encoding support can vary. A filename ending in an expected extension does not prove that the underlying file has that format or that the browser can decode it. Use a real still image in the format the particular tool accepts. If loading fails, confirm the source opens correctly in an image viewer and obtain a fresh export from the application that created it. Renaming a file extension does not convert its contents.

Processing happens locally in the browser. The tool does not use an image-processing API or upload your selected image files for the operation. The surrounding website may have analytics or other site features governed separately; local processing describes this tool’s treatment of the image, rather than every possible network request made by the page. Keep the tab available until processing and downloads finish. A slow phone or a busy browser may need fewer files per batch.

Keep results useful after downloading

Name important outputs with their role and dimensions, such as product-square-1400 or scan-notes-cropped. For an exact repeated extraction, record x, y, width, height, and the source filename. Coordinates are meaningful only for that source’s pixel grid and orientation; applying them blindly to another image can select a different subject.

Keep the full original until the crop has been approved for its purpose. A crop permanently omits surrounding pixels from that exported copy, and no format conversion can recover those missing edges. Return to the original if you need more breathing room, another aspect ratio, or a different subject position.

Keep the source image and treat the downloaded result as a separate working copy. The workflow does not destroy your original file. A useful filename describes the change and purpose, such as a size, format, or version label, so a later handoff does not depend on remembering which download came first. Save important copies somewhere you can find again; a preview remaining on screen is not the same as a saved file.

Where multiple image results are offered, processing runs sequentially and you can inspect and download the results individually or collect them in a ZIP created locally. Check the count before closing the page, especially if one source failed while others succeeded. A ZIP groups the result files for convenience; it does not improve image quality or change the encoding inside each file. Open a representative output after extracting it, then review any unusually small or visually different result separately.

For JPG, PNG, and WebP exports, choose the format for the recipient’s actual needs. JPG has no transparent pixels. PNG can retain transparency but its encoder ignores a photographic quality slider; changing that control does not provide a PNG file-size target. WebP availability depends on the browser and destination. A quality value for a lossy format is an encoder setting, not a promise of a particular number of kilobytes. The image dimensions, texture, noise, and chosen format all influence the final size.

Frequently asked questions

What does cropping do?

Cropping creates a new image from a rectangular region of the source and omits the surrounding pixels from that output. It changes framing rather than simply scaling the complete picture. The original file remains available, so keep it if you might later need different edges or another composition.

Are numeric coordinates measured in preview pixels?

No. The x, y, width, and height fields describe original-image pixels. The preview may be scaled to fit your screen, so a short on-screen drag can represent many source pixels. Use the numeric values for precise work and the preview to judge the resulting composition.

Where is the coordinate origin?

The crop coordinates use the original image’s top-left corner as the reference. x moves horizontally to the right and y moves vertically downward. Confirm the loaded orientation before entering copied coordinates, because rotating the image changes which visible content occupies a particular region.

Is width the same as the right-edge coordinate?

No. Width measures the selected rectangle from its starting x position. The right boundary is x + width. Likewise, the lower boundary is y + height. If you were given two corner coordinates, subtract the starting values from the ending values to find the region’s dimensions.

How do I keep a crop inside the source?

Use a nonnegative starting x and y, positive width and height, and ensure x + width does not exceed source width and y + height does not exceed source height. These checks establish a valid rectangle, but you still need to inspect whether it contains the intended content.

How can I make a square image?

Choose equal crop width and height and position that square around the content you want to retain. Inspect the entire subject before exporting. If a complete wide or tall subject cannot fit without being cut off, use padding in the resizer rather than forcing a crop.

Does cropping improve resolution?

It can focus attention on a smaller region, but it does not add captured detail. A small face extracted from a large scene still has only the source pixels in that region. Enlarging it afterward creates a larger grid without recovering genuinely missing information.

Can I crop a circle or an irregular shape?

This cropper selects a rectangular region. A circular display mask or a hand-drawn transparent cut-out is a different operation. You can prepare a rectangular source for a circular destination, but check how that destination masks corners and whether the subject remains visible.

Does it automatically find the subject?

No. Pointer selection and numeric fields give you control, but the cropper does not identify faces, products, text, or backgrounds automatically. Decide what should remain and inspect the result. This is especially important for off-centre subjects and images with meaningful edge content.

Can cropping remove an opaque background?

Cropping can discard the outside of the image rectangle, but it cannot follow a subject’s outline or remove background between parts of the subject. Background segmentation is not provided. A rectangular crop around a person still includes whatever background remains inside that rectangle.

Should I crop before resizing?

When composition matters, choosing the intended region first makes it easier to evaluate the actual source area and available detail. Then resize the cropped copy for delivery. Return to the original for a different crop rather than repeatedly cropping and enlarging an already reduced result.

Can I use one crop on different photos?

Only apply the same numeric region when it makes sense for the same-sized and similarly composed sources. A shared rectangle can select different content in different photographs. Inspect each result rather than assuming that identical coordinates produce an equivalent composition across a batch.

Will the crop keep all metadata?

Do not use this raster crop workflow as a promise about retaining or removing every metadata field. Its purpose is the visible image region. If metadata, provenance, or privacy requirements matter, inspect the exported file with an appropriate tool and use a workflow designed for those requirements.

Can I straighten a tilted page?

A rectangular crop can remove margins but does not perform arbitrary-angle deskew. The separate rotate tool provides quarter turns and flips, which help with sideways or upside-down images. A slightly tilted scan needs an editing workflow that specifically supports straightening by an arbitrary angle.

Does a crop certify that sensitive content is removed?

No formal redaction certification is provided. Inspect the downloaded copy for all sensitive visible content and consider the complete workflow, including other copies and metadata. Use a dedicated redaction process when disclosure consequences require stronger assurance than a visual crop preview.

What should I check before saving the crop?

Check all four edges, important context, output dimensions, readability at final size, and whether the destination will crop it again. Open the downloaded result rather than relying only on the selection overlay. Save it as a separate copy and retain the full source for possible revisions.